TPF Studies>>>Detailed View | |
| Study Number: | TPF-5(080) |
| Status: | Objectives fulfilled |
| Title: | Investigation of Low Temperature Cracking in Asphalt Pavements |
| Contract/Other Number: | |
| Sponsoring Agency: | Minnesota Department of Transportation |
| Lead Agency: | Minnesota Department of Transportation |
| Lead Agency Contact: | Ben Worel (ben.worel@dot.state.mn.us) Phone: 651-366-5522 Fax: 651-366-5461 |
| Contractor: | University of Minnesota |
| Study Partners: | CT, IA, ID, IL, KS, MN, ND, NY, VT, WI |
| Contract Amount: | $665,000 |
| Commitments Received: | $590,000 |
| 100% SP&R Approval: | Approved |
| Contract Start Date: | 9/30/2004 |
| Contract End Date: | 12/31/2007 |
| Background: | Low temperature cracking is the most prevalent distress found in asphalt pavements built in cold weather climates. As the temperature drops the restrained pavement tries to shrink. The tensile stresses build up to a critical point when a crack is formed and partial stress relief occurs. The current Superpave specification attempts to address this issue by specifying a limiting low temperature for the asphalt binder. The specification does a reasonable job predicting performance of conventional asphalt cements, but this does not hold true for polymer-modified asphalt binders that are manufactured to reach very cold temperature grades needed in cold climates. Typically the base asphalt binder controls the low temperature properties. As an example a PG 58-34 is made with an xx-34 grade asphalt and polymer is added to achieve the high end (58). Currently the low temperature specification considers only the asphalt binder. Specifications must be developed for the complete asphalt mixture. Although low temperature cracking appears to be controlled by a single-event mechanism, it is very important to understand the mechanism of crack initiation and propagation. These cracks can be initiated by traffic loading, cycles of temperature changes, and then propagated by a large drop in temperature. In addition, the significant effects of aging and moisture on crack formation and propagation is also not fully understood and needs investigation. |
| Objectives: | The development of a fracture-mechanics-based specification is one of the objectives of this study. It will allow for a better selection of asphalt binders and mixtures with respect to their resistance to crack formation and propagation. This fracture mechanics approach will also be used to investigate the detrimental role of aging and moisture to fracture resistance of asphalt materials. |
| Scope of Work: | · Utilize a national Technical Advisory Panel (TAP) to assist in the selection and development of testing methods that measure fundamental material properties related to low temperature cracking. · Collect samples and mix designs from participating states and industry and run all recommended new testing methods. · Correlate the test results with documented field performance. · Develop and refine the most promising new testing methods for low temperature cracking. · Calibrate and validate the thermal cracking model in the 2002 AASHTO design guide. · Select mix designs for the reconstruction of MnROAD. Construction and field validation at MnROAD will be completed in the next phase of the study. |
| Comments: | It is anticipated that each state will contribute $50,000 for this project. The funds can be transferred per the agencies discretion into three possible fiscal years 2004, 2005, and 2006. Committing states are asked to do so electronically. |
| Active Study URL: | http://mnroad.dot.state.mn.us/research/MnROAD_Project/MnROADReports/MnRoadOnlineReports/Investigation_of_Low_Temperature_Cracking_in_Asphalt_Pavements.pdf |
| Study Documents: | Final Report |
| Type: Final Report | |
| Quarterly Report - 4/1/2007 - 6/30/2007 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 1/1/2007 - 3/31/2007 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 10/1/2006 - 12/31/2006 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 7/1/2006 - 9/30/2006 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 4/1/2006 - 6/30/2006 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 1/1/2006 - 3/31/2006 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 10/1/2005 - 12/31/2005 | |
| Type: Quarterly Progress Report | |
| December 12, 2005 Meeting Minutes | |
| Type: Other | |
| Quarterly Report - 7/1/2005 - 9/30/2005 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 4/1/2005 - 6/30/2005 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 1/1/2005 - 3/31/2005 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 10/1/2004 - 12/31/2004 | |
| Type: Quarterly Progress Report | |
| Quarterly Report - 7/1/2004 - 9/30/2004 | |
| Type: Quarterly Progress Report | |
| August 9, 2004 to October 15, 2004 | |
| Type: Quarterly Progress Report | |
| Work Plan | |
| Type: Work Plan | |
| Task 2 Sampling - Identify Pavement Sites and Laboratory Materials | |
| Type: Report | |
| September 30th Meeting Minutes | |
| Type: Other | |
| Executive Summary | |
| Type: Study Summary | |
| Subjects: | Pavement Design, Management, and Performance |
| .................... .................... .................... .................... .................... .................... .................... .................... | |
Copyright statement and legal notices
Please send comments, suggestions, and queries to the Webmaster.